Programs......
by
HEADVOL1.exe
:...
FEATURES:.
- Easy way
to check volumes of heads with simple Height and width
measurements
- Computer
Quick answers, 2 really slick programs to cover most
2-Cycle Hemi-Head designs
- No
Graphics Needed. NEW now does all
compression facts figuring too
- For RADIUSED SQUISH
BAND cutting, (see Headvol2 for
Lathe cut Squish bands).
INPUTS:.
- Head Bowl
Height
- Head Bowl
Width
- Squish
Area Height
- Squish
(Bore) Width
- Depth of
Step Cut in Head
- Plus all
usual input data to calculate compression ratios on your
engine
OUTPUTS:.
- Bowl
Radius
- Bowl
Volume CC
- Squish
RADIUS
- Squish
Area CC
- Step Area
Vol. CC
- Squish
Band Width, (Flat & on Head)
- Total Head
Height
- Total Head
Volume CC
- Plus all
usual output data of calculated compression DATA on your
engine
- Now Has
Ultra Quick File Saving Features and Inch & Metric
Printer Output
Click on Picture to Enlarge
Program does not do graphics.
HEADVOL2.exe :.....
FEATURES:.
- Easy way
to check volumes of heads with simple Height and width
measurements
- Computer
Quick answers, 2 really slick programs to cover most
2-Cycle Hemi-Head designs
- No
Graphics Needed
- Headvol2
is a must for people cutting heads on a lathe as lathe
normally can only cut Squish band at an ANGLE
- NEW now
does all compression facts figuring too
INPUTS:.
- Head
Bowl Height
- Head
Bowl Width
- Squish
Area Height
- Squish
(Bore) Width
- Depth
of Step Cut in Head
- Plus
all usual input data to calculate compression ratios on
your engine.
OUTPUTS:.
- Bowl
Radius
- Bowl
Volume CC
- Squish
ANGLE
- Squish
Area CC
- Step
Area Vol. CC
- Squish
Band Width, Flat & on Head
- Total
Head Height Total Head Height
- Total
Head Volume CC Total Head Volume CC
- Plus
all usual output data of calculated compression DATA on
your engine.
- Now
Has Ultra Quick File Saving Features and Inch &
Metric Printer Output.
Click on Picture to Enlarge
Program does not do graphics.
Go to DETONATE
Article by TSR
HEADVOL3.exe
:
........Enhance the Head Design
Set.
- Used
by WATERCRAFT and Snowmobiles
- BATH-TUB
SHAPED HEADS
FEATURES:.
- Easy way
to check volumes of heads with simple Height, width
and Radius measurements
- Computer
Quick answers, a really slick program to cover 2-Cycle TUB-HEAD designs
- No
Graphics Needed
- Headvol3
is a must for people cutting heads on a lathe as lathe
normally can only cut Squish band at an ANGLE
- NEW now
does all compression facts figuring too
INPUTS:.
OUTPUTS:.
- Total Tub
Volume CC (TOO MANY TO LIST)
- Squish
ANGLE, See HEADVOL1 & HEADVOL2
- Squish
Area CC
- Step Area
Vol. CC
- Squish
Band Width, (Flat & on Head)
- Total Head
Height
- Total Head
Volume CC
- Plus all
NEW output data of calculated compression ratios on your
engine
- Has Ultra
Quick File Saving Features and Inch & Metric Printer
Output
Click on Picture to Enlarge
Program does not do graphics.
